Excelta M-4-S鑷子尖部寬度0.13mm X 0.08mm薄,Very Fine Tips精密細長尖頭適合在5X-10倍放大顯微鏡下精細工作,采用馬氏體高碳不銹鋼材質制作,59HRC洛氏硬度,耐高溫300℃,用于微電子半導體、醫療器械制造等行業。
Excelta M-4-S鑷子尖頭0.13mm X 0.08mm,總長度69mm,適于5倍~10X顯微鏡放大條件下夾持細小物體精細操作,用于軍工航天、微電子半導體、醫療器械制造、學校實驗室研究等。EXCELTA M-4-S材料為AISI 440馬氏體高碳不銹鋼,具有59HRC高硬度,耐高溫300℃,Made in Switzerland瑞士制造。M-4-S鑷子規格文檔http://m.iamabigfatstupidface.com/download/202302/Excelta_M-4-S_Datasheet.pdf
★★★★★五星 超精密系列,提供超精密與最先進的材料,用于最關鍵的應用,如5-CO
★★★★四星 極高精度系列,為苛刻應用設計,達到和超過高精度要求,精密電子、軍工行業,如3-SN鑷子
★★★三星 精度高,設計用于半導體和微電子及醫療器械制造,適用5~10X放大顯微鏡下操作,如M-4-S鑷子
★★ 二星 精細,兩星系列兼顧精度要求和價格,問題滿足大多數消費電子產品的要求,5A-SA-PI
★一星 一般精度,一星線以經濟的價格提供高質量的產品,7-SA-SE、5A-SA-SE等
型號 | 尖頭尺寸 | 尖部類型 | 材質/長度 | 星級 |
M-5-S鑷子 | 0.1mm X 0.05mm |
STRAIGHT TAPERED MICRO FINE POINTS 直頭尖錐型,極細尖頭 |
Stainless Steel高碳不銹鋼,69mm | ★★★三星 |
M-5-SA | 0.1mm X 0.05mm | Neverus不銹鋼SWISS made, 78mm | ★★★三星 | |
M-5-SA-ET | 0.1mm X 0.05mm | Neverus不銹鋼帶泡沫柄,94mm | ★★★三星 | |
M-5-CO | 0.05mm X 0.01mm |
TAPERED TIPS WITH MICRO FINE POINTS 極細尖直頭 |
Cobalt鈷合金,78mm |
★★★★★ 五星 |
M-5-CO-ET | 0.05mm X 0.01mm | Cobalt鈷合金,帶塑料柄94mm |
★★★★★ 五星 |
|
M-4-S鑷子 | 0.13mm X 0.08mm | STRAIGHT TAPERED VERY FINE POINTS | Stainless Steel不銹鋼,69mm | ★★★三星 |
M-4A-S鑷子 | 0.24mm X 0.14mm | STRAIGHT TAPERED FINE POINTS尖直頭 | Stainless Steel不銹鋼,90mm | ★★★三星 |
M-3-S鑷子 | 0.17mm X 0.1mm | STRAIGHT FINE POINTS尖細直頭 | Stainless Steel不銹鋼,90mm | ★★★三星 |
M-3-CO鈷鑷子 | 0.08mm X 0.04mm |
STRAIGHT TIPS WITH FINE POINTS 尖細直頭鑷子 |
Cobalt鈷合金,78mm |
★★★★★ 五星 |
M-3-CO-ET | 0.08mm X 0.04mm | Cobalt鈷合金,帶塑料柄78mm |
★★★★★ 五星 |
|
M-6-CO | 0.07mm X 0.03mm | 75° ANGLED TIPS WITH SHARP POINTS | Cobalt鈷合金,78mm | ★★★★★ |
0C | 0.17mm X 0.1mm | STRAIGHT FINE POINTS尖直頭鑷子 | Carbon Steel碳鋼 | ★★★三星 |
0C-SA | 0.17mm X 0.1mm | Neverust長度90mm | ★★★三星 | |
0C-SA-PI | 0.17mm X 0.1mm | Anti-Mag. SS | ★★兩星 | |
0C-SA-SE | 0.17mm X 0.1mm | Anti-Mag. SS | ★一星 | |
M-2-SA | 0.2mm X 0.12mm | STRAIGHT TAPERED VERY FINE POINTS | Neverust長度85mm | ★★★三星 |
M-2A-SA圓頭 | 1.5mm X 0.2mm | STRAIGHT TAPERED FLAT ROUND POINTS | Neverust長度69mm | ★★★三星 |
M-00D | 0.33mm X 0.1mm | STRAIGHT MEDIUM SERRATED POINTS - SERRATED HANDLES,中等尖頭 帶齒握把 | Carbon Steel碳鋼 | ★★★三星 |
M-00D-SA | 0.33mm X 0.1mm | Neverust長度85mm | ★★★三星 | |
M-AC | 0.38mm X 0.2mm | STRAIGHT MEDIUM POINTS - SERRATED HANDLES中等粗直頭、鋸齒握把手柄 | Carbon Steel碳鋼85mm | ★★★三星 |
M-H-S | 0.3mm X 0.1mm | STRAIGHT STRONG POINTS粗硬尖頭 | Anti-Mag. SS | ★★★三星 |
M-H-SA | 0.3mm X 0.1mm | Neverust長度90mm | ★★★三星 | |
M-179A-RT | 0.63mm X 0.63mm | STRAIGHT TAPERED VERY FINE REPLACEABLE POINTS可換尖頭鑷子,細尖 | Copolymer碳纖維尖頭,78mm |
★★★★ 四星 |
Micro Fine Tips微細型尖頭:用于在高倍顯微鏡下操作,尖部完全一致且精確閉合,如M-4-S、M-5-S
Fine Tips精密尖頭:可用于低倍數放大顯微鏡應用,或不需要放大鏡的精細操作,如5-SA
Medium Tips中等尖部:半細尖頭,用于任何不需要放大顯示的夾持操作,如AA-SA鑷子
Blunt Strong Tips堅硬鈍頭:用于需要高硬度但精細度不高的操作,使用時間長,如20-SA
Flat Tips平頭:用于放置、移除標簽或者夾取透鏡這類扁平物體,通常是扁圓頭形狀,如M-2A-SA
Application Specific Tips特殊應用頭部:用于特定應用,包括15A-GW剪切鑷子、SMD鑷子等